Yes, moldavite can go in the water, but we do not recommend that you keep it in water.
When you want to know can moldavite go in water, you will find different suggestions on the internet. We will explain why it is suitable to put it in water for a short time. You can also know why you should not put in water for a long time.
Can Moldavite Go in Water?
Moldavite can go in the water because it does not dissolve and have a high hardness score that prevents water damage. Two factors are essential for a stone to resist water damage.
It should have a hardness level of more than five and low solubility. Malachite has a high solubility level. You cannot add it to water because it will dissolve to give toxic fumes.
The low hardness level of the selenite prevents us from putting the stone in the water. When you put it in water, the stone size and weight decrease.
Some can produce harmful chemicals when you put them in water. This factor also prevents us from putting some stones in the water.
You must understand the properties of a crystal. You cannot use the same parameters for the other stones.
Why Don’t You Recommend for Moldavite to Go in Water?
Moldavite can safely go in the water, but we do not recommend soaking it for a long time will crack the crystal or change its color.
You can consider many factors when someone asks can moldavite go in water. Crystals have small cracks at the molecular level.
The water will enter these cracks to widen them. Removing the water from these cracks is difficult because some water molecules are trapped in the fissures when you soak for a long time.
Some stones change color when you place them in water. The reason can be tinted polish or metal impurities removal. Most rock shops use tinted polishes to enhance the stone color.
The stone will not look the same when the water erodes the surface. When water enters the cracks, it removes some metal atoms that give color to the crystal.
You may see some brown patches on the crystals when you soak them for a long time. These patches are due to the rust.
Water can react with the metal atoms in the crystal to make rust. You cannot remove the rust in the deep parts of the crystal without removing the affected area.
What Can You Do to Protect Moldavite From Water Damage?
There are many ways to protect the moldavite from water damage. The best way is to avoid putting the crystal in the water for a long time.
People place the stones in water for cleaning, cleansing, and healing purposes. You can clean it with a damp cloth. It is also suitable to run water over it for a few seconds.
You need to dry it before placing it in the storage container. You can buff it with a dry cloth to remove the water on the surface. Removing water from the small cracks is more critical.
You can place it in an open space with airflow. You can flip it many times to ensure all surfaces receive enough air to dry the hidden cracks.
You should not put it in salt water because salt can stick to the crystal, decreasing its integrity. You can cleanse it using cleaning stones and moonlight.
People should not wear moldavite jewelry in the pool to avoid water damage. It is better to place the stone on the top of the container to make the crystal water.
There is no need to put it in the water to make the crystal water. If you cannot avoid water soaking, you need to take extra care of the stone.
You cannot sleep with it as stone may fall and break. You cannot place it with other crystals in one box because it may break when other crystals hit it.
Can You Swim with Moldavite?
Yes, you can swim with the moldavite because it will not break immediately when you swim with it. You can also swim in the ocean because salt water will not dissolve the moldavite.
Swimming with the moldavite does not damage the crystal immediately, but you should not do it often as it can decrease the crystal integrity.
You need to take better care of the stone when you take it with you to the swimming pool. The crystal may become weak and break with little pressure.
Can Moldavite Be Affected by Earthquake Deformation?
Moldavite, a green gemstone formed from a meteorite impact, can be affected by rock deformation before earthquake.
The intense pressure and movement during an earthquake can impact the structure of the moldavite, potentially altering its appearance or properties. Understanding this process can help in identifying authentic moldavite specimens.
Should Moldavite Have Air Bubbles?
Moldavite should have air bubbles of size 0.01 to 0.9 millimeters. It is a stone with hundreds of bubbles because they make up to one percent of the stone’s area.
You will not find irregular-shaped bubbles in the moldavite. All bubbles should be spherical. Some bubbles may combine to make channels.
You may see long lines made due to the fusion of these bubbles. The direction of the lines will be in the same direction.
These bubbles do not have air as they usually consist of a vacuum. When the moldavite hardens, it creates tension between the material layers. The bubbles are due to this tension.
How Can You Tell the Difference Between Real Moldavite and Fake Moldavite?
You can tell the difference between real Moldavite and fake Moldavite by checking the lechatelierite. Real moldavites have the lechatelierite.
You can see them by looking at the stone in the magnifying glass. This lechatelierite will appear all over the stone. You can also tell the difference in color.
Moldavite only has olive green. If a person is selling you a stone with different color by the name of moldavite, you should avoid it.
There are some bubbles in the moldavite. You can check the size and shape of the bubbles to find authenticity. You can also check for the imperfections in the stone.
You can consult someone if you find a piece without imperfections at a lower price. It is better to consult experts if you are about to make a big deal.