Selenite is a gypsum mineral. It is famous due to its positive energy. People charge other crystals with the Selenite plates. The other way to charge the crystals is by putting them in water.
Many ask can Selenite go in water because they want to put other crystals in water with Selenite to increase energy transfer. We will give you details about the Selenite water resistance.
Can Selenite Go in Water?
No, Selenite cannot go in water because it consists of soft material. Water can damage the crystal structure of Selenite.
It is crucial to learn the properties of Selenite to understand the lack of water resistance of this crystal.
Gypsum is not a hard material like Quartz or Feldspar.
People use Gypsum to produce drywall or chalk.
You can break and scratch these materials with your hands.
We do not recommend putting some water on the Selenite to clean the surface of the crystal.
Selenite can resist water damage for a few seconds.
If you accidentally splash some water on the Selenite crystals, you should immediately use a cloth to dry them.
If you do not clear the water from the Selenite surface fast, it will damage the crystal surface.
You can place the Selenite with other crystals to cleanse them.
It is one of the best healing benefits of the Selenite.
There are no issues in touching the surface of other crystals with the selenite because it can resist some physical force.
There is no need to cleanse the Selenite with water because it can produce positive vibrations without water.
Some suggest cleansing Selenite with non-contact methods because it can increase the cleansing abilities of the Selenite.
In the Presence of Water, What Happens to Selenite?
You will see changes in the Selenite crystal within an hour of putting the Selenite in water.
There is a way to test the water effects on Selenite.
You can lower half of the Selenite crystal in the water.
Water will start damaging the Selenite surface to make the surface porous.
You can check the difference between the crystal inside and outside water by physical inspection.
You will see the effects of water from the moment you put the Selenite in the water.
If there is a sealant on the selenite surface, it will protect the crystal for some time.
There is a delay in the damaging effects of water if a sealant is there.
You will see the most damage in the areas with low sealant thickness or sealant damage.
Water does not stop damaging the Selenite crystals until it is completely gone.
You will see the water effects at the start with the surface damage.
As the water damages Selenite, it will break the crystal into pieces.
You will not observe any rapid reactions or poisonous gases emission because Selenite does not have toxic components.
People lost entire Selenite crystals when they forgot to take them out of the water.
Can Selenite Go in Moon Water?
Putting the selenite in the Moon water is unsuitable because Moon Water cleansing requires a long time.
All practitioners recommend against putting Selenite in the Moon Water due to rapid deterioration.
It does not mean you cannot use Moonlight to cleanse the Selenite crystals.
You may see a decrease in the Selenite cleansing energy when it absorbs a lot of negative energy while cleansing other crystals.
It is also better to place the Selenite and the crystal you want to cleanse in the moonlight together.
The best way is to find a place where Selenite can receive Moonlight the entire night.
You can place the crystal on the ground or wood piece.
It is better to place it on a natural object.
Putting on something synthetic will not give you the maximum cleansing results.
You can pick the selenite early in the morning to keep the moonlight energy in the crystal.
Sunlight can act against the Moonlight to give a different type of energy to the Selenite.
Picking up the crystal early in the morning will avoid dew formation on the crystal.
Dew can damage the Selenite crystals fast because it can penetrate small crevices of the crystal.
Some suggest that you can pick the Selenite in hand and go for some strides to give it more energy from nature.
Can Selenite Go in Saltwater?
You cannot put Selenite in the Saltwater because it also damages the Selenite crystals.
You can check the Selenite hardness level on the Moh hardness scale to find out about the effects of water on the Selenite.
Water can damage the selenite when there is no salt in it. It is due to the hardness score of 2 on the Moh hardness scale.
Materials with a hardness score of 5 or more can effectively resist water damage.
Selenite does not react with the Sodium or Chloride atoms in the Saltwater.
There is no risk of toxic compound production when you put the Selenite in the water.
Water alone can dissolve the entire Selenite crystal.
There is no need for any additional harsh agents to facilitate it.
You may see a rapid deterioration of Selenite crystal in the saltwater due to faster crystal structural damage.
Salt can weaken the Selenite structure faster due to changes in the water osmolarity.
To Summarize: Can Selenite Go in the Water
People ask can selenite go in water because they do not want their Selenite to collect more negative energy from other crystals.
You can keep some points in your mind to understand the water resistance of Selenite and other crystals with low hardness scores.
- Putting Selenite in water will damage the crystal structure.
- You may lose the entire Selenite crystal if you put it in the water for a long time.
- Selenite can suffer from water damage due to a low hardness score. It has a hardness score of 2 on the Moh hardness scale.
- Saltwater also damages the Selenite crystals.
- You cannot put Selenite crystals in Moonwater.
- Moonlight can help you charge the Selenite crystals faster.